Several different reports are available. The number of reports and their content can change between different customers.
To show reports, go to the Calculation tab in Results/Administration, select a calculation, right-click and select Show report.
To generate a report, right-click on a station or subgroup in the margin, and select the desired report.
Alarm report
The last alternative in the right-click menu is Alarm report. The alarm report only displays the alarms in the network.
If there are any alarms, the alarm report is also displayed as a chart. The content of the chart can be different depending on the presentation level.
|
The colors for the alarm categories can be changed in the codelist Categories for alarm / ALARM_CATEGORY_CL, see section Edit alarm categories. |
By default, an A-alarm is more serious than a B-alarm.
Examples of alarm limits:
Alarm type = 1
Voltage drop %
LV < 1.0 kV 5 > % will result in an A-alarm
MV > 1.0 kV 5 > % will result in an A-alarm
Alarm type = 2
Relative conductor load (load current compared to rated conductor current)
90 – 100 % will give a B-alarm
100 > % will give an A-alarm
Alarm type = 3
Fuse alarm. Tripping time is above allowed value in the parameter set.
A too long time will give an A-alarm
Alarm type = 4
Voltage < 207 V will give an A-alarm
Voltage > 244 V will give an A-alarm
Alarm type = 5
Relative fuse load (load current against the rated current of the fuse)
80 – 100 % will give a B-alarm
100 > % will give an A-alarm
Alarm type = 6
Transformer load 1-25kV
90 – 100 % will give a B-alarm
100 > % will give an A-alarm
By using the tool buttons in the chart, it is possible to Select series
, Display value 
, Zoom in/out 
and Pan 
.
With the file menu it is possible to Export to PDF and Close application window.
With the settings menu it is possible to select the checkboxes Grid, Legend and Log y and it is also possible to Adjust Colors, Set labels and Add titles.
The checkbox Grid adds a grid to the chart.
The checkbox Legend adds a legend to the chart.
The checkbox Log y logs y to the chart.
Adjust Colors opens the color palette dialog which allows you to change the color for the chart.
Set labels opens the dialog Set labels which allows you to change the labels for x and y axis.
Add titles opens the dialog Add titles which allows you to change the header, sub-header or footer.