|
<< Click to Display Table of Contents >> Administration > Menu reference > Administration > Symbol editor > Menu reference: Editing window > Settings > Command field |
Opens a command field where a set of system commands can be entered. Approved commands are temporarily stored and can be retrieved with the arrow-up key and arrow-down key.
1.Choose View > Command field. The command field opens.
2.Select command from the list.
3.Select component in graphics view.
4.Click Run.
Coordinate setting |
E.g. when zooming. ne=north, east where north is the north coordinate and east is the east coordinate. or xy=mathematical x,mathematical y. Note! Mathematical coordinate system. Example: ne=6980486,1516983 |
View rotation |
Rotates the graphical view. vr=angle in degrees Example: vr=20 |
Buffer zone |
Creates a buffer zone around a selected component. bz=distance in meters Example: bz=10. Select then a component in the graphical view. A buffer zone is created around the component. Select refresh (F5)to remove the buffer zone. |
Grid |
Shows a grid with set distance. gr=distance in meters Example: gr=10 |
Delta movement |
E.g. when moving a component. dx=delta x mathematical, delta y mathematical Example: dx=30,20 |
Angle definition |
E.g. when rotating component. aa=angle value in degrees Example: aa=25 |