Pole type diameter and impregnation type

---Valid for dpPower---

In order for the decay damage inspection to work, both in dpPower Maintainer and in dpFieldmap Maintainer, it is required that the original diameter is set for the pole type.

To verify/set this, select the Codelist manager and select:

Codelist owner: FPP.

Codelist: ELPOLTYPE_CL.

The diameter is set in the column GROUND_BOUND_DIAMETER.

 

 

The type of impregnation needs to be verified as well, creosote or salt.

To verify/set this, select the Codelist manager and select:

Codelist owner: FPP.

Codelist: ELPOLMATERIAL_CL.

In the column ALT_TEXT you will found the type of impregnation that has been used, S for salt or C for creosote.

Note! This needs to be configured.