Creates a postable copy by disconnecting from the network in use.
•Partial copy is a function where you can create one or several new changesets with whole or selected parts from an existing changeset.
•Select which objects and which stages to copy from the existing changeset.
Area of use
•Allows you to connect a new network to the existing one and thus avoid creating a network calculation copy and adjusting the original.
•Projects that have become too large can be split.
•Allows you to connect a new network to the existing one to create a network station / cable cabinet card in dpPower.
Prerequisites
•The partial copy function requires that the changesets are optimistic.
•Objects in use should not be selected in the selection selection.
•Changesets created with partial copy should be clearly named.
•Facilities in use in dpPower that do not correspond to facilities in the field and are to be changed should be documented in another changeset, since objects in use are not included in the selection.
•Cables in use that are splitted are not included in the selection. It may be supplemented afterwards.
•Where cables in use are divided with the Joints with cable split function, the joint state must be changed to be selectable in the selection.
|
Never post the original changeset when using the Create Partial Copy function. Post only the changeset that is the partial copy. If the original changeset is posted, conflicts will arise that can be complicated to resolve. |
1.Log in to a changeset where a new network has been connected to an existing network.
2.To start the function, select File> Copy> Create Partial Copy. The Select State dialog box opens.
3.Check the states to be included, (all states are pre-checked by default) and press OK. The Create Partial dialog box opens with the selected objects.
4.Press Create Partial Copy to create a partial copy. The Select Changeset dialog box opens.
5.Create a new changeset, name it something suitable and press OK.
6.Select the recently created changeset from the list and press OK. The Create Partial Copy dialog box informs that a partial copy has been transferred to the changeset. The function has now created an original, where only objects with state Planned and Projected are included (these were selected in the Select state window). Existing network in use has been restored and the new network is not connected to the existing one.
Settings
Selected states |
The states that were selected in the previous step. |
Remove area |
Allows you to draw a polygon in the map to delete the affected objects. |
Add area |
Allows you to draw a polygon in the map to add affected objects. To add an area, you can either delete all listed objects and then add new ones using the Add Area button or use the button directly to add more objects to the list. Use the Add area button and draw a polygon on the map where the new objects are located. When you are satisfied with the location of the polygon, right-click and select Define area to place it in the map. |
Create partial copy |
Allows you to create a partial copy. |
|
Allows you to select one or several objects in the list and delete them. |
More information
|
The selected objects are presented in the Create Partial Copy window. To check the affected objects in the map, select all the objects, right-click and select the option Colorize and select color. The objects in the map are colored in the selected color. |
Create partial copy with a split cable
If, for example, wires in use have been split using the Place > Joints with cable split function, the joints state should be changed to a state available for Create Partial Copy. To splice a new cable to an existing one, the Place > Joints with cable split > Joint or Branch joint function can be used.
1.To start the function, select Place > Joints with cable split.
2.Left-click on the cable to specify the split point.
3.Left-click to specify the original line.
4.Change the state of the joint using Edit > Change state and left-click on the joint.
5.Select the state that the joint should take and press OK.
6.Change the state of the cable that is not going to be used and press OK.
7.Reconnect the power supplies and the joint will be included for Create partial copy and the existing cable is unchanged.